CMT 835.817.11 Rabbeting Bit w/Bearing 1-1/4" x 1/2" H=3/8" S=1/2" Cutter Heads They are Hot Dip Galvanized

They are Hot Dip Galvanized for better rust protection with exterior use and in all pressure treated lumber

Nominal Post Size: 6x6

Note: Product dimensions may differ from picture

Material: Single or double-sided laminated panels

The Simpson LGT2 LGT 2-Ply Girder Tiedown by Simpson Strong-Tie is a connector designed for moderate-load applications with multi-ply trusses

CMT 835.817.11 Rabbeting Bit w/Bearing 1-1/4" x 1/2" H=3/8" S=1/2" Cutter Heads They are Hot Dip GalvanizedThe CMT 835. 817. 11 is a Rabbeting Bit with Bearing Guide. Rabbeting bits cut rebates (rabbets) along board edges for joinery, cabinet backs, and door frames. Interchangeable bearing set adjusts the rabbet depth. Cutting Height: 3 8". SPECIFICATIONS Product Type Rabbeting Bit with Bearing Guide Cutting Height 3 8" Shank 1 2" Blade Material Carbide Tipped (TCT) Rotation Right hand (RH) Country of Origin Made in Italy COMPATIBLE MACHINES Handheld