Premium Male/Male Jumper Wires - 40 x 12" (300mm) SF_Buttons and Switches which will only be available

which will only be available by special order once our existing stock runs out

or secure the IMU board to a project with something like epoxy

have a look at the VINT 12-bit Voltage Output 4V

the servo will automatically turn off its power to avoid getting burned

May 2023 update: Feetech has changed the case color of these from red to silver

Premium Male/Male Jumper Wires - 40 x 12" (300mm) SF_Buttons and Switches which will only be availableHandy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0. 1" male header contacts on either end and fit cleanly next to each other on standard pitch 0. 1" (2. 54mm) header. The best part is they come in a 40 pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them