Raise3D - Interchangeable Hotend Assembly with 0.4mm V3H Nozzle - Pro3/Pro3 Plus Filtre This series of nozzles is

This series of nozzles is for those who only want the best

and the backlight brightness can be adjusted by turning the potentiometer behind the display

ensuring that your printer can continue to run at optimal performance

This kit is specifically designed to upgrade the ventilation and cooling system around the extruder heating unit for more efficient cooling and better results during printing

The camera has a traditional time-lapse function

Raise3D - Interchangeable Hotend Assembly with 0.4mm V3H Nozzle - Pro3/Pro3 Plus Filtre This series of nozzles isRAISE3D Interchangeable Hot end Assembly with V3H Nozzle for the Pro3 series The coated V3H nozzle improves filament feeding capabilities and provides greater wear resistance than the standard brass Hotend. It can be used for left and right extruders. If you use different nozzle bores, you will need to adjust the nozzle parameters and extension width in the slicer. The nozzle diameter must also be adjusted in the hardware settings on the device.