Headstock Bearings and Seals: Honda CX650 CX 650 (1983) Yamaha RD250 This is a high spec

This is a high spec coil so you'll no longer need to use a resistor (if the bike still has one) and you'll get a better spark

This ignition coil has been manufactured to replace the original coil pack on a Honda FES125 for the years and models shown above

This set of rear shocks is designed to replace the original shocks on a Honda XL500 for the years and models shown above

This set of black series brake pads will fit the front brake on a Suzuki RF600 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Suzuki GSX1300 for the years and models shown above

Headstock Bearings and Seals: Honda CX650 CX 650 (1983) Yamaha RD250 This is a high specBrand new set of headstock steering bearings with seals to fit: Honda CX 650 ED Eurosport (1983). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CX650 for the years and models shown above. Top and bottom steering bearings with seals are included. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 30mm x 50mm x 15mm. All sizes set out ID x OD x Thickness. Seals